Lubricants


Lubricants


Cold End Coating

Lubricoat™

  • Product Description
    Exceptionally high-purity Food Grade Kosher-approved Oleic Acid surface coating when applied to glassware provides protection for the glass to reach the consumer intact and scratch-free. Used on containers typically requiring more care when handling such as wine and food containers. This product complies with FDA requirements for indirect and direct food contact.
  • Typical Uses
    Provides a protective, scratch resistant lubricious external coating for glass containers.
  • Physical Properties
    • Appearance- Yellow hued, clear, oily liquid
    • Odor - Mild
    • Boiling Point - Greater than 349°C / 660.2°F
    • Vapor Pressure - Less than 1.33 mbar
    • Specific Gravity - 25°C / 77°F (7.40lb./gal)
    • Freezing Point - 7.07°C - 12.77°C / 44.726°F - 54.986°F
    • Water Solubility - Slight Soluble
    • Shelf Life - One year under original seal
    • Packaging - 1-gallon container / 400lb drum (55 gallon drum)
  • Method of Use
    A very thin coating of Lubricoat™ cold end coating is applied to the exterior of the newly formed glass, as they emerge from the annealing lehr. The temperature of the containers is reduced to between 225°F and 275°F as the surface treatment is applied. This process increases line mobility and reduces abrasions. This maintains the inherent strength of the container.
    The properties are greatly enhanced when applied over a “hot end” coating of a metallic oxide of tin or titanium. The degree of lubricity improvement will vary widely and depends on the quality and type of hot end coating. The smoother the hot end coating, the higher scratch resistance and more lubricious of a coating Lubricoat™ can provide.
  • Product Information Sheet

    Download Product Information Sheet


Lubricant & Antistatic Agent

Lubri/Stat® M2

  • Product Description
    Lubri/Sat®M2 is a high-performance food grade coating applied to the exterior of Polyethylene Terephthalate (PET) preforms and bottles.

    Lubri/Stat®M2 is aproven surface coating system that creates a lubricious protective film that enhances bottle appearance, eliminates both static electricity & dust accumulation on the bottle wall, reduces sticking, scuffing & scratching that provides the user with superior bottle handling characteristics.

    PackagingLubri/Stat®M2 is available in 39.5 lbs. pail and 434 lbs. drum.

    Shelf Life - Approximately 18 months as 100% concentrate.
  • Typical Uses
    Polyethylene Terephthalate (PET) bottles, preforms, strapping other plastic polymers and glassware.
  • Physical Properties
    • Appearance- Light Yellow Liquid
    • pH(as is) - 4.0 - 6.0
    • Density - 0.9587 - 0.9880
    • Viscosity (20 rpm) - 80 - 130 cP
  • Application
    Lubri/Stat®M2 is a concentrate that is easy to mix and apply. We recommend Lubri/Stat®M2 concentrate be diluted with 32 parts deionized water, occasionally agitating. Lubri/Stat®M2 is applied utilizing the Lubri/Stat® Spray System - a unique precision on-line ultrasonic spray system which is simple to use and cost effective. The ultrasonic spray nozzle keeps spray material and air consumption to a minimum. The construction of the unit is stainless steel. 

    Lubri/Stat®M2 can also, be applied with other spray systems and by dipping or rolling depending upon the product and manufacturing process.
  • Product Information Sheet

    Download Product Information Sheet

Cold End Coating
Lubricoat™

Download Product Data Sheet

Lubricant & Antistatic Agent
Lubri/Stat®M2

Download Product Data Sheet

The information contained herein is based on data considered accurate.  However, no warranty or guarantee of any kind is expressed or implied regarding the accuracy of the data or the results to be obtained from the use thereof. Because the information contained herein may be applied under conditions beyond our control, we assume no responsibility for its use.